Structure-based approaches for the design of 6-aryl-1-(3,4,5-trimethoxyphenyl)-1H-benzo[d][1,2,3]triazoles as tubulin polymerization inhibitors.

The colchicine binding site on tubulin has been widely acknowledged as an attractive target for anticancer drug exploitation. Here, we reported the structural optimization of the lead compound 4, which was proved in our previous work as a colchicine binding site inhibitor (CBSI). Based on docking researches for the active binding conformation of compound 4, a series of novel 6-aryl-1-(3,4,5-trimethoxyphenyl)-1H-benzo[d][1,2,3]triazole derivatives (9a-9x) were developed by replacing a CH group in the 1H-benzo[d]imidazole skeleton of compound 4 with a nitrogen atom as a hydrogen bond acceptor. Among them, compound 9a showed the strongest antiproliferative activity with IC50 values ranging from 14 to 45 nM against three human cancer cell lines (MCF-7, SGC-7901 and A549), lower than that of compound 4. Mechanistic studies indicated that compound 9a could inhibit tubulin polymerization, destroy the microtubule skeleton, block the cell cycle in G2/M phase, induce cancer cell apoptosis, prevent cancer cell migration and colony formation. Moreover, compound 9a significantly inhibited tumor growth in vivo without observable toxicity in the mice 4T1 xenograft tumor model. In conclusion, this report shows a successful case of the structure-based design approach of a potent tubulin polymerization inhibitor for cancer treatment.

Reconstruction of recurrent shoulder dislocation with glenoid bone defect with 3D-printed titanium alloy pad: outcomes at 2-year minimum follow-up.

BACKGROUND: To evaluate the outcome of shoulder arthroscopy-assisted implantation of three-dimensional (3D)-printed titanium pads for recurrent shoulder dislocation with glenoid bone defects. METHODS: From June 2019 to May 2020, the clinical efficacy of 3D printed titanium pad implantation assisted by shoulder arthroscopy, for the treatment of recurrent shoulder dislocations with shoulder glenoid defects was retrospectively analyzed. The American Shoulder and Elbow Surgeons (ASES) shoulder, Rowe, and Constant scores were recorded before surgery and at 3 months, 6 months, 1 year, and 2 years after surgery. 3D computed tomography (CT) and magnetic resonance imaging were used to evaluate the location of the glenoid pad, bone ingrowth, joint degeneration, and osteochondral damage. RESULTS: The mean age of the 12 patients was 21.4 (19-24) years and the mean follow-up time was 27.6 (24-35) months. The Visual Analog Scale score significantly improved from 5.67 ± 1.98 preoperatively to 0.83 ± 0.58 postoperatively (p = 0.012). The postoperative ASES score was significantly increased to 87.91 ± 3.47 compared with preoperative ASES score (46.79 ± 6.45) (p < 0.01). Rowe and Constant scores also improved from 22.5 ± 12.34 and 56.58 ± 7.59 preoperatively to 90.83 ± 4.69 and 90.17 ± 1.89 at 2 years postoperatively, respectively. CT performed 2 years after surgery showed that the pad perfectly replenished the bone-defective part of the shoulder glenoid and restored the articular surface curvature of the shoulder glenoid in the anterior-posterior direction, and the bone around the central riser of the pad was tightly united. Magnetic resonance imaging 2 years after surgery showed that the humeral head osteochondral bone was intact, and there was no obvious osteochondral damage. CONCLUSIONS: 3D printed titanium pads are a reliable, safe, and effective surgical procedure for treating recurrent shoulder dislocations with glenoid bone defects.

A simulation and risk assessment framework for water-energy-environment nexus: A case study in the city cluster along the middle reach of the Yangtze River, China.

In the Anthropocene, there is a strong interlinkage among water, energy, and the environment. The water-energy-environment nexus (WEEN) has been vigorously advocated as an emerging development paradigm and a global research agenda. Based on the nexus concept, a framework for the WEEN complex system simulation and risk assessment is developed. The three metropolitan areas of the city cluster along the middle reaches of the Yangtze River (CCMRYR) are taken as the objects. Regional policies are combined with generic shared socio-economic pathways (SSPs) to form a localized SSPs suitable for the research region. The dynamic simulation of the WEEN complex system and the risk analysis are carried out with the combination of system dynamics models and copula functions. Results show that: There are obvious differences in water utilization, energy consumption, air pollutant emissions, and water pollutant emissions among the three metropolitan areas. The issue of high carbon intensity in the Wuhan Metropolitan Coordinating Region needs to be emphasized and solved from the perspective of optimizing the industrial structure. Adhering to current development patterns, there will be successive peaks in water utilization, energy consumption, and carbon emissions in Wuhan, Dongting Lake, and Poyang Lake Metropolitan Coordinating Region by 2030, leading to high synergy risks at the systemic level, with maximum values of 0.84, 0.85, 0.62, respectively. A development path based on conservation priorities indicates that future policymaking needs to prioritize a resource-saving and pollution-control development pattern directed by technological upgrading against the backdrop of scarce natural resource endowments. The localized SSPs are a beneficial extension that enriches the narrative of regional-scale SSPs. The evolutionary trajectories and risk assessments of WEEN complex systems under different localized SSPs provide a sweeping insight into the consequences of policy decisions, thus enabling policymakers to appraise policy rationality and implement appropriate corrective measures.

Modeling and forecasting CO2 emissions in China and its regions using a novel ARIMA-LSTM model.

Since China joined the WTO, its economy has experienced rapidly growth, resulting in significantly increase in fossil fuel consumption and corresponding rise in CO2 emissions. Currently, China is the world's largest emitter of CO2, the regional distribution is also extremely uneven. so, it is important to identify the factors influence CO2 emissions in the three regions and predict future trends based on these factors. This paper proposes 14 carbon emission factors and uses the random forest feature ranking algorithm to rank the importance of these factors in three regions. The main factors affecting CO2 emissions in each region are identified. Additionally, an ARIMA + LSTM carbon emission predict model based on the inverse error combination method is developed to address the linear and nonlinear relationships of carbon emission data. The findings suggest that the ARIMA + LSTM is more accurate in predicting the trend of CO2 emissions in China. Moreover, the ARIMA + LSTM is employed to forecast the future CO2 emission trends in China's east, central, and west regions, which can serve as a foundation for China's CO2 emission reduction initiatives.

In Situ Hydrogel Polymerization to Form a Flexible Polysaccharide Synergetic Binder Network for Stabilizing SiOx/C Anodes.

Today, the commercial application of silicon oxides (SiOx, 1 < x < 2) in lithium-ion batteries (LIBs) still faces the challenge of rapid performance degradation. In this work, by integrating hydrothermal and physicomechanical processes, water-soluble locust bean gum (LBG) and xanthan gum (XG) are utilized to in situ form an LBG@XG binder network to improve the performance of SiOx/C anodes. As a synergy of LBG and XG polysaccharides in hydrogel polymerization, LBG@XG can tightly wrap around SiOx/C particles to prevent plate damage. The flexible SiOx/C anode with the LBG@XG binder exhibits capacity retentions of 74.1% and 76.4% after 1000 cycles at 0.5 A g-1 and 1 A g-1, respectively. The full battery capacity remains stable for 100 cycles at 1 C and the rate performance is excellent (103 mAh g-1 at 3 C). This LBG@XG is demonstrated to be highly electronegative and has a strong attraction to SiOx/C particles, thereby reducing the expansion and increasing the stability of the SiOx/C anodes when coupled with the flexible binder network. In addition to the promising LBG@XG binder, this work also provides a research idea for developing green water-based binders suitable for application in the SiOx/C anodes of LIBs.

Synthesis towards Phainanoid F: Photo-induced 6π-Electrocyclization for Constructing Contiguous All-Carbon Quaternary Centers.

In this paper, we report an efficient strategy for synthesizing the DEFGH rings of phainanoid F. The key to the construction of the 13,30-cyclodammarane skeleton of the molecule was a photo-induced 6π-electrocyclization and a homoallylic elimination. Notably, this is a rare example of using electrocyclization reaction to simultaneously construct two vicinal quaternary carbons in total synthesis. The strategy outlined here forms the basis of our total synthesis of Phainanoid F, and it could also serve as a generally applicable approach for synthesizing other natural products containing similar 13,30-cyclodammarane skeletons.

E-value: a superior alternative to P-value and its adjustments in DNA methylation studies.

DNA methylation plays a crucial role in transcriptional regulation. Reduced representation bisulfite sequencing (RRBS) is a technique of increasing use for analyzing genome-wide methylation profiles. Many computational tools such as Metilene, MethylKit, BiSeq and DMRfinder have been developed to use RRBS data for the detection of the differentially methylated regions (DMRs) potentially involved in epigenetic regulations of gene expression. For DMR detection tools, as for countless other medical applications, P-values and their adjustments are among the most standard reporting statistics used to assess the statistical significance of biological findings. However, P-values are coming under increasing criticism relating to their questionable accuracy and relatively high levels of false positive or negative indications. Here, we propose a method to calculate E-values, as likelihood ratios falling into the null hypothesis over the entire parameter space, for DMR detection in RRBS data. We also provide the R package 'metevalue' as a user-friendly interface to implement E-value calculations into various DMR detection tools. To evaluate the performance of E-values, we generated various RRBS benchmarking datasets using our simulator 'RRBSsim' with eight samples in each experimental group. Our comprehensive benchmarking analyses showed that using E-values not only significantly improved accuracy, area under ROC curve and power, over that of P-values or adjusted P-values, but also reduced false discovery rates and type I errors. In applications using real RRBS data of CRL rats and a clinical trial on low-salt diet, the use of E-values detected biologically more relevant DMRs and also improved the negative association between DNA methylation and gene expression.

Clinical Observation of Uninterrupted Thrombolytic Therapy via Indwelling Catheter for Lower Limb Deep Vein Thrombosis.

Purpose: Observe uninterrupted thrombolytic therapy via indwelling catheter for lower limb deep vein thrombosis. Methods: We retrospectively studied data from 32 patients with lower extremity deep vein thrombosis who received comprehensive treatment, consisting of general treatment, inferior vena cava filter implantation, interventional thrombolysis, angioplasty, stenting, and post-operative monitoring. Results: The efficacy and safety of the comprehensive treatment were observed for a follow-up period of 6-12 months. The treatment was 100% effective; patient results indicated no serious bleeding, acute pulmonary embolism, or death after surgery. Conclusion: The combination of intravenous and healthy side femoral vein puncture and directed thrombolysis to treat acute lower limb deep vein thrombosis is safe, effective, and minimally invasive while still achieving a good therapeutic effect.

Integrated transcriptomics and lipidomics investigation of the mechanism underlying the gastrointestinal mucosa damage of Loropetalum chinense (R.Br.) and its representative component.

BACKGROUND: Loropetalum chinensis (R.Br) Oliv (Bhjm), a Chinese folk herbal medicine, was traditionally used in the treatment of wound bleeding and skin ulcers. A new drug named JIMUSAN granules used for gastrosia was developed by our group, and clinical trials have been approved. However, as the principal herb, the material basis and underlying mechanisms of Bhjm in attenuating gastrointestinal mucosa damage (GMD) remain to be systemically illuminated. PURPOSE: An integrated strategy was used to explore the therapeutic effects and mechanisms of Bhjm and ellagic acid (EA) on GMD zebrafish, using network pharmacology, transcriptomics, lipidomics, and real-time quantitative PCR (RT-qPCR) verification. METHODS: First, network pharmacological analysis was used to infer the major effective constituents and targets of Bhjm. Ultra high performance liquid chromatography-linear ion trap/orbitrap high resolution mass spectrometry (UHPLC-LTQ-Orbitrap HRMS) and ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) were employed to identify the chemical constituents and quantify the different types of constituents. Second, zebrafish model of GMD was established by using 2,4,6-trinitrobenzenesulfonic acid (TNBS) to evaluate the efficacy of Bhjm and EA. The potential mechanism was examined by integrated transcriptomics and lipidomics analysis. Finally, validation tests were implemented using RT-qPCR. RESULTS: In this study, targets indentified by network pharmacology were related to inflammation and mucosal damage. Ten representative components that interacted with these targets were simultaneously determined by UHPLC-MS/MS. Sixty four compounds were identified or tentatively characterized, most of which were flavonoids and polyphenols. Bhjm and EA alleviated mucosal damage and reduced inflammation in a TNBS-induced zebrafish GMD model, indicating that EA was the main active compounds. Eight common differentially expressed genes were downregulated by Bhjm and EA, as determined by transcriptomics analysis. Lipidomics analysis confirmed 12 differential lipids, including phosphatidylcholine (PC) and triglyceride (TG). Further network enrichment analysis demonstrated that differential lipid metabolism was regulated by klf4 and hist1h2ba, and were validated by RT-qPCR. CONCLUSION: In our study, the chemical profile of Bhjm was clarified. Moreover, the GMD repair effect and the mechanism of Bhjm and EA was comprehensively analyzed for the first time, involving inflammation and lipid metabolism. Collectively, these findings will be significantly helpful for deeply exploring the clinical application value of Bhjm.

Choose the appropriate implantation position of the Femoral Neck System in the femoral neck: a finite-element analysis.

PURPOSE: There is no specific literature on the best implantation position of the Femoral Neck System (FNS) for treating Pauwels type III femoral neck fracture in young adults. METHODS: Use finite-element analysis to compare the mechanical properties of implantation positions: FNS in the central position, FNS in the low position, and FNS in the low position combined with cannulated screw (CS). The CT data of the femur were imported into the mimics20.0 to obtain the three-dimensional model of the femur; imported into geomagic2017 and SolidWorks 2017 for optimizations; models of FNS and CS are built on the basis of the device manuals. Grouping is as follows: FNS group, FNS-LOW group, and FNS-CS group. Assemble and import them into abaques6.14 for load application. The displacement distribution and von Mises Stress value of them were compared. RESULTS: On femoral stability and stress distribution, the FNS-CS group performs best, followed by the FNS-LOW group, and finally FNS group. The FNS-LOW group has an improvement over the FNS group but not by much. CONCLUSION: In operations, when the implantation position of the central guide wire is not at the center of the femoral neck but slightly lower, it is recommended not to adjust the wire repeatedly in pursuit of the center position; for femoral neck fractures that are extremely unstable at the fracture end or require revision, the insertion strategy of FNS in the low position combined with CS can be adopted to obtain better fixation effects.

A Modified Endoscopic Technique with Three Incisions for Rockwood Types III and V Acromioclavicular Joint Dislocation.

OBJECTIVE: Acromioclavicular joint dislocation is one of the most common shoulder injuries in young men. With the advancement of minimally invasive technology, arthroscopy of acromioclavicular joint dislocation has been recognized for its good curative effect. This study aimed to explore the technical details and clinical efficacy of a modified minimally invasive endoscopic treatment for acromioclavicular joint dislocation. METHODS: Clinical data of patients receiving the three-incision endoscopic treatment were retrospectively reviewed between July 2013 and July 2019. A total of 72 patients with acromioclavicular joint dislocation of Rockwood type III (n = 42) and type V (n = 30) were included in this study. Postoperative routine radiography was performed to evaluate acromioclavicular joint reduction and fixation. In addition, functional recovery of the shoulder joint was assessed using the American Shoulder and Elbow Surgeons (ASES) and Constant-Murley scores. Differences between the preoperative and postoperative data were compared using paired t-tests. RESULTS: All patients underwent loop plate elastic fixation under endoscopy during 24 to 48 months of follow-up. Postoperative radiography showed that the acromioclavicular joint achieved anatomical reduction. The ASES score (91.1 ± 4.2) was significantly improved compared to the preoperative ASES score (62.4 ± 3.1) (t = 46.65, P < 0.0001). The Constant-Murley score (93.1 ± 4.6) was also significantly higher than that before the operation (40.7 ± 6.4) (t = 56.41, P < 0.0001). No postoperative complications occurred. During follow-up, four patients had mild acromioclavicular joint degeneration but no obvious pain symptoms. CONCLUSION: The modified three-incision endoscopic technique optimizes the surgical incision, reduces trauma, is minimally invasive, and provides rapid rehabilitation with satisfactory clinical outcomes.

rAAV-mediated over-expression of acid ceramidase prevents retinopathy in a mouse model of Farber lipogranulomatosis.

Farber disease (FD) is a rare monogenic lysosomal storage disorder caused by mutations in ASAH1 that results in a deficiency of acid ceramidase (ACDase) activity and the abnormal systemic accumulation of ceramide species, leading to multi-system organ failure involving neurological decline and retinopathy. Here we describe the effects of rAAV-mediated ASAH1 over-expression on the progression of retinopathy in a mouse model of FD (Asah1P361R/P361R) and its littermate controls (Asah1+/+ and Asah1+/P361R). Using a combination of non-invasive multimodal imaging, electrophysiology, post-mortem histology and mass spectrometry we demonstrate that ASAH1 over-expression significantly reduces central retinal thickening, ceramide accumulation, macrophage activation and limits fundus hyper-reflectivity and auto-fluorescence in FD mice, indicating rAAV-mediated over-expression of biologically active ACDase protein is able to rescue the anatomical retinal phenotype of Farber disease. Unexpectedly, ACDase over-expression in Asah1+/+ and Asah1+/P361R control eyes was observed to induce abnormal fundus hyper-reflectivity, auto-fluorescence and retinal thickening that closely resembles a FD phenotype. This study represents the first evidence of a gene therapy for Farber disease-related retinopathy. Importantly, the described gene therapy approach could be used to preserve vision in FD patients synergistically with broader enzyme replacement strategies aimed at preserving life.

Arthroscopic Subscapularis Augmentation Using the Long Head of the Biceps Tendon for Anterior Shoulder Instability.

The limitations of transferring the coracoid process along with the conjoined tendon are coracoacromial arch damage, technical difficulty, and nerve injury. The long head of the biceps tendon (LHBT) proximal transposition technique has a weaker sling effect and a risk of nerve injury. The arthroscopic subscapularis augmentation technique may have risks of shoulder external rotation restriction and subscapularis transection. Herein, we introduce an arthroscopic technique for the transfer of the LHBT for subscapularis augmentation to address these risks. Indications of this technique were patients younger than 45 years of age who engage in competitive sports, require forceful external rotation and abduction, have a related capsule-ligament insufficiency, and have a glenoid bone loss <25%. The steps include detaching the LHBT at the upper edge of the pectoralis major, transecting and braiding the LHBT, establishing a scapular tunnel, placing a guide suture through the upper third of the subscapular and scapular tunnel, passing the LHBT through the established tunnels, and fixating the LHBT. This technique achieves stability of the anterior shoulder by transecting and transferring the distal end of the LHBT to press on the upper third of the subscapularis muscle.

[Treatment of finger spasm after stroke with wheat grain moxibustion at Shixuan (EX-UE 11) combined with rehabilitation training: a randomized controlled trial].

OBJECTIVE: To compare the clinical effect of wheat grain moxibustion combined with rehabilitation training and simple rehabilitation training on finger spasm after stroke. METHODS: A total of 80 patients with finger spasm after stroke were randomly divided into an observation group and a control group, 40 cases in each group. The control group was given routine rehabilitation training, once a day, 30 min each time. The observation group was given wheat grain moxibustion at Shixuan (EX-UE 11) on the basis of the control group, 8~10 moxibustion cones at each point, once a day. Both groups were treated for 6 days as one course of treatment for 4 courses. The motor function of the affected hand (Fugl-Meyer assessment [FMA] score) and muscle tension (modified Ashworth scale [MAS] grading), surface EMG indexes (wrist dorsiflexor muscle and flexor carpal metacarpal muscle mean square [RMS] value), hand muscle strength (neurological deficit score [NDS]) and daily living ability (modified Barthel index [MBI] score) were compared between the two groups before and after treatment, and clinical efficacy was evaluated. RESULTS: After treatment, FMA and MBI scores in the 2 groups were increased compared with before treatment (P<0.05), and those in the observation group were higher than the control group (P<0.05). The RMS value of wrist dorsiflexor muscle and flexor carpal metacarpal muscle in relaxation and passive function testsand and NDS in the 2 groups were lower than those before treatment (P<0.05), and those in the observation group were lower than the control group (P<0.05). MAS grading in the 2 groups was improved compared with before treatment (P<0.05), and that in the observation group was better than the control group (P<0.05). The total effective rate of the observation group was 92.5% (37/40), which was higher than that of the control group (80.0%, 32/40, P<0.05). CONCLUSION: Wheat grain moxibustion at Shixuan (EX-UE 11) combined with rehabilitation training can improve the hand motor function and daily living ability of patients with finger spasm after stroke, improve the degree of spasm and the function of wrist dorsiflexor muscle and flexor carpal metacarpal muscle, the clinical effect is better than simple rehabilitation training.

Response characteristics of highland barley under freeze-thaw, drought and artemisinin stresses.

The freeze-thaw of early spring in China's Qinghai-Tibet Plateau is often accompanied by severe droughts. Artemisia annua, widely distributed in China, releases allelopathic substances, mainly artemisinin, to the environment and exerts a wide range of effects on crops. This paper studied the physiological effects of highland barley under freeze-thaw, drought, and artemisinin stress through indoor simulation experiments. The physiological response characteristics of superoxide dismutase (SOD) activity, catalase (POD) activity, net photosynthetic rate, relative water content (RWC), relative electrical conductivity, malondialdehyde (MDA) content, and soluble protein content in highland barley were analyzed. The results showed that artemisinin and drought contributed to the increase of SOD activity and the decrease of POD activity. Under the freeze-thaw stress, the SOD and POD activities both decreased firstly and then increased, but the effect of compound stress on POD was more complicated. Either artemisinin, drought, or low temperature could reduce the net photosynthetic rate of highland barley. Low temperature had more significant impacts on photosynthesis, and compound stress would show a single stress superimposed effect. Artemisinin, drought, and low temperature could reduce the RWC of highland barley, and increase the relative electrical conductivity and the concentration of soluble protein (except for low temperature stress above zero, which reduces the concentration of soluble protein). However, the effect of compound stress on soluble protein is more complex. The single stress of artemisinin and drought had no obvious effect on MDA content, while the MDA content was increased significantly under the freeze-thaw stress and the compound stress of artemisinin and drought, and the MDA content reached its peak at T1. The results are helpful to explore the effects of freeze-thaw, drought and artemisinin stress on the growth of highland barley under the background of the aridification of the Qinghai-Tibet Plateau, and provide ideas for rational agricultural management.

Case report: Brucellosis with rare multiple pulmonary nodules in a depressed patient.

Background: Brucellosis is a zoonotic disease that threatens public health and creates an economic burden. Unfortunately, it is often overlooked in developing countries, with misdiagnosis causing negative impacts on those with low income. Although the symptoms of brucellosis are commonly reported as fever and fatigue, rare pulmonary, and psychiatric involvements should also be considered. We present the first brucellosis patient in China with multiple pulmonary nodules and depression. Furthermore, this report highlights the importance of collecting patient history in epidemic areas of brucellosis. Case presentation: We report the case of a 40-year-old woman with intermittent fever for 2 months and gradually accompanied by chills, dry cough, arthralgia, and fatigue. The patient was also diagnosed with depression after fever. She received symptomatic treatment at a regional hospital; however, there was no significant symptom relief. She suddenly developed hemoptysis 1 day prior to arrival at our hospital, where we discovered that her liver, spleen, neck, and axillary lymph nodes were enlarged, and there were multiple nodules in both lungs. The patient was eventually diagnosed with brucellosis after the serum agglutination test and received antibiotic therapy, which provided symptom relief. Conclusion: This report describes a case of brucellosis with uncommon multipulmonary nodules and depression in China. This study has widened the evidence of respiratory involvement due to brucellosis. Second, it demonstrates the importance of collecting a comprehensive medical history, especially in epidemic areas. In conclusion, for febrile patients with pulmonary nodules and depression, especially in endemic areas, brucellosis should be considered.

[Determination and comparison of 10 active components in different parts of Loropetalum chinensis based on ultra-high performance liquid chromatography-tandem mass spectrometry].

To establish a method for the simultaneous determination of ellagic acid, quercetin, gallic acid, kaempferol, myricetin, tiliroside, salidroside, isoquercetin, chlorogenic acid, and quinic acid in the leaves, flowers, fruits, and roots of Loropetalum chinensis by ultra-performance liquid chromatography-tandem mass spectrometry, and provide references for the development and utilization of L. chinensis resources. The analysis was performed on the chromatographic column ACQUITY UPLC HSS T3(2.1 mm×100 mm, 1.8 µm) with a gradient mobile phase of acetonitrile-0.2% formic solution at the flow rate of 0.3 mL·min~(-1). Column temperature was 30 ℃ and injection volume was 2 µL. Multiple reactive ion monitoring mode(MRM) was used in the negative ion ionization mode of electrospray ion source. The 10 active components had a good linear relationship, and the established method was stable, simple, and accurate. The 10 active components existed in different parts of L. chinensis, with significant different content. The main components in different parts of L. chinensis were polyphenols, with the highest content, followed by flavonoids. The content of 10 active components was generally high in flowers. Among them, the content of quinic acid was the highest, reaching 22.539 1 mg·g~(-1). This study elucidates the differences of active components in the same part and the different parts of L. chinensis, thereby providing basis for the research on the pharmacodynamic substances of L. chinensis and references for the comprehensive development and utilization of L. chinensis resources.

Reconstruction of traumatic medial malleolus loss using the bone sliding technique: A case report.

INTRODUCTION: Open injury of the medial malleolus is relatively rare, and it can cause instability of the ankle joint and affect the walking function of the lower extremity. We describe an original plan for the reconstruction of medial malleolus defects using the bone sliding technique and report as follows. CASE PRESENTATION: A 48-year-old female presented with an isolated open injury to her right ankle by a traffic accident. The skin of the medial ankle was severely contaminated with mud, and the medial malleolus, part of the Talus's cartilage and soft tissue, were defective. The anterior tibial artery was cut, and the anterior and posterior tibial tendons were ruptured. CONCLUSION: We describe the reconstruction of the medial malleolus using a bone sliding technique. At two years follow-up, she had a good outcome with a nearly painless, stable ankle with functional plantarflexion but restricted dorsiflexion. The original method is a new choice for the reconstruction of the medial malleolus.

[Treatment of unstable femoral neck fracture with posteromedial comminutations by cannulated screws and medial bracing plate combined with bone allograft].

OBJECTIVE: To evaluate the effectiveness of unstable femoral neck fracture with posteromedial comminutations treated by cannulated screws and medial bracing plate combined with bone allograft. METHODS: The clinical data of 18 patients with unstable femoral neck fracture with posteromedial comminutations treated by cannulated screws and medial bracing plate combined with bone allograft between July 2016 and March 2020 were retrospectively analyzed. The age ranged from 22 to 64 years, with a median age of 43 years. The causes of injury included 11 cases of falling injury, 3 cases of traffic accident injury, and 4 cases of fall from height injury. According to Garden classification, the femoral neck fracture was classified as type Ⅲ in 3 cases, type Ⅳ in 15 cases, and all patients were type Ⅲ according to Pauwels classification. The time from injury to operation was 1-5 days, with an average of 2.3 days. The fracture healing time and complications were recorded. The quality of fracture reduction was evaluated by Garden index immediately after operation; at last follow-up, the degree of femoral neck shortening was determined by Zlowodzki method, Harris score was used to evaluate hip function. RESULTS: The operation time was 62-98 minutes (mean, 75 minutes); intraoperative blood loss was 101-220 mL (mean, 153 mL). Cannulated screws guide wire was inserted 3-5 times (mean, 4 times). Intraoperative fluoroscopy was performed 9-21 times (mean, 15 times). The hospital stay was 5-11 days (mean, 7.2 days). All the patients were followed up 12-40 months with an average of 17.3 months. There was no postoperative complication such as accumulated pneumonia, lower extremity deep venous thrombosis, nail cutting, nail withdrawal, internal fixation fracture, and so on. There was no fracture nonunion and osteonecrosis of the femoral head during the follow-up; the fracture healing time was 7-15 weeks, with an average of 12.1 weeks. The quality of fracture reduction was evaluated immediately after operation, the results were grade Ⅰ in 15 cases and grade Ⅱ in 3 cases. At last follow-up, there were 2 cases with femoral neck shortening less than 5 mm and 1 case with 5-10 mm. The incidence of femoral neck shortening was 16.7%. The Harris score of hip joint was 73-97, with an average of 93.5; among them, 12 cases were rated as excellent, 3 cases as good, and 3 cases as fair, with an excellent and good rate of 83.3%. CONCLUSION: For the treatment of unstable femoral neck fracture with posteromedial comminutations, cannulated screws and medial bracing plate combined with bone allograft are dramatically effective due to earlier weight bearing, faster fracture healing, and better hip function recovery.

SiO x /C Composite Anode of Lithium-Ion Batteries with Enhanced Performances Using Multicomponent Binders.

A silicon suboxide-carbon (SiO x /C, 1 ≤ x ≤ 2) composite anode of lithium-ion batteries (LIBs) with enhanced performance is prepared using an aqueous multicomponent binder technology. Considering the adhesive force, electrolyte absorption, and stability, different binders including sodium alginate (SA), polyacrylamide gel (PAM), polytetrafluoroethylene (PTFE), and their composites are evaluated. It is indicated that compared to other anodes with single- or multicomponent binders, the SiO x /C composite anode with PAM/SA/PTFE663 (PSAP663) binders exhibits strong adhesion, moderate electrolyte absorption ability, and a specific capacity of 427 mA h g-1 charge-discharged at 0.5 A g-1 after 300 cycles. The improvement of electrochemical performance is attributed to the comprehensive effects of composite binders, including the adhesion of active substances, surface protection, solution adsorption, conductive path, and so on. These results show that the PSAP663 binder has promising potential for application, which not only gives alternative practical schemes of the green binders for the SiO x /C anodes but also provides ideas to develop a high-performance adhesive technology for LIBs.